When coverage is difficult to estimate, add more rather than less when doing DIY wall painting. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
As in human relationships, incompatibility between paint layers can be a recipe for disaster. For example, a surface finished with alkyd or oil paint must be treated with primer before being covered with latex or acrylic paint. In intense sunlight, oil paint, which becomes fragile over time, tends to crack. Latex paint, on the other hand, is fairly elastic. When the sun heats an exterior wall, it expands along with the wall itself.
Both options have their pros and cons. Spraying is the faster method that usually only requires one coat coverage, is free of brush marks and can get into hard to reach areas. Spraying does, however, have a longer prep time, the possibility of uneven coverage, and poor adhesion. Brushing has excellent control, good adhesion, uniform coverage and is better for getting into smaller cracks. Brushing takes a lot longer, requires two coats and can leave brush marks. Make sure your contractor has solid and definite reasons for picking one method over the other.
house color combination
Tony's Painting has proven to me that there experience and workmanship is of high quality. During the time they worked on my home they were very knowledgeable and thorough in all aspects of the job which included acoustic removal, patching and sanding of the ceiling, texturing and painting. I was so pleased with their work, I called them back to stain and seal my newly installed stair cases. Again, they did a job well done! I would highly recommend Tony's Painting to anyone.
A key point in persevering hardboard siding is properly sealing any and all areas that water can penetrate. One of the most overlooked areas is punctured nail heads. This can occur from over-driving the nails when the siding is installed or as the siding swells the nail heads become recessed which exposes the siding to water and accelerated rotting. We will completely seal all punctured nail heads with a premium-grade caulk prior to any finish painting to protect your siding.
The question, “how is your warranty program funded?” will probably get you some puzzled responses. The fact is, most contractors have never even considered how to pay the expenses associated with warranty callbacks, and some contractors just seem to vanish when they get a warranty call. A professional contractor will be preparing for callbacks (they will happen, even to the best contractors) by including a line item in their budget for warranty work. Ask the question and see what kind of response you get. Sometimes, how the question is answered is more important than the answer itself!
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to [email protected] and a project advisor will reach out to assist you. –HASupport