Painting the exterior of your home is a very important aspect of owning your own home. Maintaining the exterior and interior paint protects your most prized investment from deterioration and also gives it that “wow factor” when friends and family see your paint job. Trust the Arizona Painting Company in Phoenix or Tucson to treat your home like it was our own.
If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.

Both options have their pros and cons. Spraying is the faster method that usually only requires one coat coverage, is free of brush marks and can get into hard to reach areas. Spraying does, however, have a longer prep time, the possibility of uneven coverage, and poor adhesion. Brushing has excellent control, good adhesion, uniform coverage and is better for getting into smaller cracks. Brushing takes a lot longer, requires two coats and can leave brush marks. Make sure your contractor has solid and definite reasons for picking one method over the other.

Specialty painting by the hour costs between $40 to $50 on average. Paint might range between $75 to $90, costing an additional $40 to $50 per hour. The painter's skill and experience are also determining factors in the cost of specialty painting. While a freelance artist might charge $25 to $30 an hour, a very skilled professional might charge $80 or more. Some painters might also charge $60 or more for a consultation. Trompe l'oeils, in particular, will run on the expensive end of the price spectrum. Return to Top
High percentage of solids. The solids are what's left on the wall after the paint has dried. Anything over 45 percent is considered good; the higher the level of solids, the better, because you'll wind up with a denser, more durable coating. For example, a gallon of Dulux Exterior Flat contains 52 percent solids by weight. However, be aware that some companies add cheap fillers to beef up the percentage of solids - that makes it wise to stay away from inexpensive paints with a high level of solids. Although you typically won't find information about solids on the label, check with your paint retailer, ask to see product data sheets or fire up your modem and check the company's Website.

home painting app


Every painting job develops a unique choreography as ladders go up and come down and tarps are unrolled and folded up. But two basic principles remain: 1) Start at the top and work down. 2) Work in the shade, out of the sun's glare. As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)

The article and comments were great information to have before deciding how to go about getting a painting job done. I think the important point is that there are several key choices (who to do the work; color, sheen, quality, of paint; how many coats; amount of prep/repairs to be done and by whom, how long the job will take, provisions for changes, how detailed the contract needs to be; advanced deposit/progress payments/final payment; final inspection, etc.) that need to be made and it requires advanced research and planning in order to become well enough informed to make the right choices. Then it requires spending sufficient time to check materials and inspect the quality of the work while it is on-going, raher than waiting to do it all at the end. President Reagan's philosophy of "Trust, but verify." applies.


Missed appointments, slow arrivals, fuzzy details about deadlines... These are all bright red flags. Punctuality and a sense that your time is valued and appreciated are essential. If it’s a little rocky at the start when they’re still trying to win your business, just imagine what it will be like when the honeymoon phase is over and they have your contract in hand.

The PREP Study is attempting to reduce isocyanate, dust and solvent exposures for autobody shop workers in Connecticut. We have produced a user-friendly DVD-based training program with a great deal of input from the autobody community. The DVD contains information for painters, autobody technicians and anyone else working around a body shop, including:

closest home improvement store


Spills and spatters happen, regardless of how careful you are. It’s a lot easier to pre- pare for them than to wipe them out of your carpeting or off your wood floor later. All it takes is canvas drop cloths in your work area (a 4-ft. x 15-ft. cloth costs $15). The thick canvas stays in place, so you don’t need to tape it, and you can use it to cover any surface. Plastic drop cloths are slippery to walk on or set a ladder on and don’t stay in place. Even worse, paint spills on plastic stay wet, and they can end up on your shoes and get tracked through the house. Canvas is slippery on hard floors, so rosin paper ($10 for 400 sq. ft. at home centers) is better over vinyl, tile and hard- wood. Tape the sheets together and to the floor to provide a nonslip surface.

house painting image


With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish.

Pour some paint into the reservoir of a paint tray, dip the roller cover in, then distribute the paint evenly by rolling the cover over the ridged part of the tray. Bring the roller up to the wall, and using modest speed and a controlled motion, roll on a W shape to quickly get paint off the roller and onto the wall (A). Fill in the gaps and spread the paint film evenly over the entire 3- to 4-square-foot area (B), before going back to the pan for more paint. Repeat the process as you move across the wall, overlapping each section 30 to 40 percent over the previous area (C). Work from the top of the wall downward, to flatten any drips that occur. Don’t apply too much pressure—that will cause ridges of paint to form at the ends of the roller—and don’t worry if you can see through the first coat. “Focus on getting it smooth and even,” Henrique says, “and don’t try to stretch the paint.”
Our presentation and procedures are more professional and detailed. We don't hide information from our clients, we provide all that is needed to make an informed decision! We have available 5 year no question asked warranties! Every project is properly managed by both the team leader and owner. We also, carefully select employees during the hiring process. With our attention to detail and customer service, your satisfaction is guaranteed!

home painting images


we only use the best interior paint which goes further as far as pricing a repaint we charge 2.00 a square foot floor space for walls ceilings and trim .on new construction using the best paint 3.90 per foot floor space that is with 3 coats on all surfaces but as being a professional for 45 years i recommend use a professional so that your paint will last longer and you wont have to pay to have it done more often i do free consulting in these areas i am more than happy to assist you with your projects 864-506-6666 just always remember good paint last longer and use a washable paint your home is your most valueable investment take care of it
Many homeowners try to do their own home interior painting and are left with a half-finished project or paint spots on everything. Our professional painters take care to protect your furniture and flooring from paint splatter. We use large plastic drop cloths in combination with tape and craft paper to cover 100% of each room. Our contractors will clean the walls and patch any holes or imperfections. Repaired surfaces are primed with a high-quality primer to ensure even coverage. All of our projects are finished on time so there’s no waiting around forever for the painters to be out of your house.
Not only do I agree with what you are saying; but, I will not use Angie's List for referrals again. Their "A" rated painter did some of the exact things they are now warning against; however, they are still rated "A". I sent in a review and it took eight weeks to post it. They allowed the contractor to lie about what happened as a response. I had proof and photos. Angie's List is a scam; instead ask neighbors and friends for referrals!
Pour some paint into the reservoir of a paint tray, dip the roller cover in, then distribute the paint evenly by rolling the cover over the ridged part of the tray. Bring the roller up to the wall, and using modest speed and a controlled motion, roll on a W shape to quickly get paint off the roller and onto the wall (A). Fill in the gaps and spread the paint film evenly over the entire 3- to 4-square-foot area (B), before going back to the pan for more paint. Repeat the process as you move across the wall, overlapping each section 30 to 40 percent over the previous area (C). Work from the top of the wall downward, to flatten any drips that occur. Don’t apply too much pressure—that will cause ridges of paint to form at the ends of the roller—and don’t worry if you can see through the first coat. “Focus on getting it smooth and even,” Henrique says, “and don’t try to stretch the paint.”
This is another reason why you should always hire contractors who have employees and not those who use subcontractors. If the company you hire uses only subs to paint, they have no control over the training those subs receive.  However, even if you choose a contractor with employees, this does not guarantee that those employees receive training. The sad fact is that training just isn’t in the budget for most contractors.
Whether your project is interior or exterior, Vila suggests taking a good look at the context your colors will be part of. This includes architectural factors, since a Victorian wears deep colors much more gracefully than a Colonial. Vila also touches on neutral colors; he regards dark brown as a panacea for outside trim, and, yes, beige is a safe bet for siding. As you might expect from someone who’s been in the home-improvement biz for more than three decades, Vila isn’t wild about the notion of following color trends. All in all, his guide is on the conservative side. Then again, if you’re considering radical changes to your home’s appearance, a voice of reason should always be welcome.
When you choose Tony’s Painting for your painting needs, we guarantee your 100% satisfaction. Our company will not call a job well done without your approval! Our customers in and around San Jose, Los Gatos and Santa Clara, CA always come first and are treated with utmost respect. That’s why our slogan says “Customer Service at its best!” Expect our painter to arrive at your house on time, every time, and ready to begin work! We will always arrive on time, in a clearly marked vehicle.
×