Payment. Every client is different. Every job has it's own unique set of circumstances. I always start off the discussion with my clients saying that I'm flexible on how they would like to proceed with payments but that I prefer half down. I refuse to change order. Change orders are my last resort. Instead I ask questions at our initial meeting and try to be sure to cover all bases before I submit my estimate.
Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
painting brick house cost
Inspect the surface area for holes, cracks or other problems and apply acrylic caulk to fill them in. Use a putty knife to smooth out the caulk and remove any excess to prevent bumps. For particularly thin or narrow crevices, you may have to use your finger to smooth out the caulk. Caulk contracts and shrinks, so apply a second layer once it's dried.
Taking a few moments to read the following few pages could save you both money and frustration by avoiding a bad contracting experience. The fact is, painters range in the quality of services they provide, and there are many inexperienced, unlicensed and unqualified people and companies that masquerade as professional painters. Many homeowners are so focused on “how much” that they never even consider anything else. This can lead them to hire the wrong company.
First off all clients want a "deal" As a painting contractor for 38 years I can tell you that residential-commercial-industrial clients (and their needs are all diffrent. It seems this discussion mostly concerns residential repaints,so here goes--first off ALWAYS get a personal referance from a friend or co-worker. Always get an itemized contract that specifies the prep,color, number of coats, and specifics on payment. Remember you want to set up a relationship with the painting contractor of your choice. Bond, license and insurance are required to get a contractors license and are readily available online at your state Labor and Industries website. Second-- find someone you trust. He or his crew will probably be left alone in your home for most of the time. I always tell my clients that I wont bring someone to their home I wouldnt have in mine. Third--$$ Dont ever pay up front always insist on progress draws if the project is 2 or 3 phases remember If a contractor wants $3000 to do the job and you give him half up front he will be working for $1500. It WILL affect the quality of the product. In 38 years of business I have never taken a deposit and have never not been paid in full remember do what you said you would do for exactly what you said it would cost and there will be no problems with getting paid. one last reminder to clients you are also being evaluated when you interview a contractor. He is sizing you up as well. If he thinks you are a bit sketchy the the price will go up or he wont take the job at all. I have turned down some jobs that looked very profitable on the surface that turned out not to be so.(word gets around fast in the small painting community) Good Luck to clients and contractors
Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
Even the best exterior paint can fail if it's applied incorrectly. Always use a primer when painting any untreated surface to seal it off and to provide a base for topcoats to stick to. Alkyd primers are best for bare wood because they cover bleed-through from wood knots better; be sure the label states that the primer is designed to stop bleed-through. Water-based primers are a good choice if knots aren't an issue. Water-based paints are compatible with both types of primer. When repainting, prime only when necessary. If the paint hasn't cracked or flaked, you may not need to prime at all. Advantage 900 from Porter Paints is designed to go over any existing paint without priming or sanding. If you must scrape down to bare wood, spot-prime. Not sure whether priming is needed? Try this test: Paint a small portion of the wall and let it dry. Then put an adhesive bandage on the newly painted surface and snap it off. If paint sticks to it, the old paint won't support a new coat and requires a coat of primer. If the bandage is clean, power wash the siding and paint. For painting new construction, the FPL recommends dipping each piece of siding in a paintable water repellent, priming, then applying two coats of water-based paint. The lab also suggests installing siding on furring strips, creating a ventilated space behind it to reduce vapor. Seal the bottom with screening to keep insects out. If you hire a painting contractor, be sure he or she follows the paint manufacturer's directions. For example, the temperature should be between 50° and 90°F to apply water-based paint. Also, the topcoat should go on within two weeks of the primer. If you wait too long, the mechanical bond between the two won't be as strong because the surface texture of the primer breaks down. And if two topcoats are used (recommended for new construction), the second should go on within two weeks of the first. There are lots of exterior paints out there. Knowing how to pick the best from a lineup of look-alike cans will help your paint job last well into the next century.
We recently had indoor and outdoor painting done on our house by Home Painters Toronto. They did an ...amazing job with everything. We had several painters, a carpenter and plasterer. They were all very professional, respectful and pleasant. I would not hesitate to use them again or recommend them to someone. Thank you Brian and Home Painters. See More
wall painting design
Remaining peeling or loose paint on the house that was not removed by the high-pressure washing will be hand scraped. Many times, power washing will cause the paint to peel further by loosening the edges of the paint and hand scraping is required to properly prepare the new surfaces for painting. This is one of the most important, yet tedious, parts of the job.
A good contractor doesn’t just do quality work, of course. Workers should be courteous, pleasant, and capable of clear communication. Ideally, the people altering your home’s look will be enthusiastic about the task rather than jaded and burnt out. Find out from your references what kind of attitude the company’s workers displayed, and whether they behaved professionally. Also ask whether the crew stayed on schedule, and whether they arrived early each day, did their work, and got out of there.