High percentage of solids. The solids are what's left on the wall after the paint has dried. Anything over 45 percent is considered good; the higher the level of solids, the better, because you'll wind up with a denser, more durable coating. For example, a gallon of Dulux Exterior Flat contains 52 percent solids by weight. However, be aware that some companies add cheap fillers to beef up the percentage of solids - that makes it wise to stay away from inexpensive paints with a high level of solids. Although you typically won't find information about solids on the label, check with your paint retailer, ask to see product data sheets or fire up your modem and check the company's Website.
home painting app
The article spotlights a gorgeous, deep-red living room, then reveals brands and hues of paint you can use to recreate it. Other gems: Paint chips are ink, not paint, so don’t use them to decide which color looks best in your house; exterior paints often have more vibrant colors, so using them inside can make a bold statement; earth tones are always in style; and low-VOC paints are the way to go, for you and the planet.
CertaPro Painters® provides a range of custom interior and exterior painting services, allowing for a smooth, seamless experience and exceptional results in every home. Whether you’re having your two-story foyer updated or refreshing the paint in your home’s bedrooms, the CertaPro Painters® team approaches every painting project with an eye for detail.
You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.
to be the devils advocate i have been a building contractor 20 of the last 30 yrs. i do know that if you go to a higher sheen of paint and or darker colors then any imperfections in the walls will show up much more dramatically…therefore the painter or a good drywall finisher is needed to prepare the walls extensively. this could cause more expenses…for it takes a lot of time to prep walls (smooth walls..not textured walls) and this cost has to be absorbed.
cost of house painting
You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.
painting a brick house
Painters often tint primer close to the color of the top coat, but Wallis thinks that's a recipe for "holidays," or missed spots. Instead, he tints his primer a contrasting color. "If I can see the color coming through, I know I need to apply more paint," he says. On the cottage shown in this story, he chose a gray-blue primer to go under a peach top coat.
If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.
If a company has a formal training program, it’s a safe bet that they have their act together. They can do training in-house through regular meetings of their employees. They can have field training systems in place, usually coordinated with classroom training sessions. They can also use trade associations, such as PDCA (Painting and Decorating Contractors of America) or paint manufacturer’s representatives to stay up to date with the latest materials and techniques.
Any of these primers may be used, depending on the conditions required on your home. Oil-based primers soak into new wood better and are also used on rusting areas, such as around gas meter, prior to painting. Oil-based primer works better in keeping steel gas meters and other steel surfaces from rusting in the future. Notice the amount of white primer in Figure 3, that Scott's Painting & Staining Inc. applies to give a professional looking finish. This photo also shows the efflorescence coming out of the concrete block foundation that was scraped off and treated with a Concrete & Masonry Primer designed to help control efflorescence.
the price can always be adjusted based on on or off season, amount of colors to be used. A job like this can be done in 2 days and much quicker with a helper. I charge a bit more than others just because its quality work done professionally. Theres others that charge more than this just because they can on the on season and most people dont get a 2nd bid...
A key point in persevering hardboard siding is properly sealing any and all areas that water can penetrate. One of the most overlooked areas is punctured nail heads. This can occur from over-driving the nails when the siding is installed or as the siding swells the nail heads become recessed which exposes the siding to water and accelerated rotting. We will completely seal all punctured nail heads with a premium-grade caulk prior to any finish painting to protect your siding.
We are a Naperville-based house painting company offering professional, high quality painting -for interior painting, exterior painting, & deck staining, & powerwashing - without the high prices. Each project is closely monitored by the owner, from the paint and color selection through to the last stroke of the brush. We provide "one client at a time" service.