I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
Consider purchasing supplies personally to save money. Ask the painter for a bid that separates labor and materials. Then explain that you'll purchase the materials and ask for a list of exactly what will be needed to complete the job. Caulking, for example, is an extra supply commonly used to fill any cracks or damaged areas in your walls -- and one that might be overlooked in an incomplete list.
Create a shortlist, then get three or more references — contact information for previous customers — from each contender. Ask these references how long ago they hired the contractor in question; if it’s been several years, they can evaluate how well the paint job has held up. If you go so far as to inspect the work in person, pay attention to the windows, doors, and trim. These are areas where careful technique goes a long way, and where carelessness is especially evident.
Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to [email protected] and a project advisor will reach out to assist you. –HASupport

how much does a paint contractor cost


basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
Dave, you said it best! Every pro painting contractor truly worth their salt would and should cut and paste exactly what you say here about where customary and legitimate practices and expectations should be in regards to what customers should expect from contractors and how contractors should professionally deal with their customers. By the way, Dave, if you work in the Atlanta area, I would like to hire you! Thank you for your valuable advice!

Ideally, you want a variety of older and newer projects, and you especially want to check on a very recent project, such as something completed last month. When you do get the references list, don’t take the information for granted. Take a few minutes to check these references. Ask these homeowners about the experience while services were provided and also how well the job has held up over time.
Even the best exterior paint can fail if it's applied incorrectly. Always use a primer when painting any untreated surface to seal it off and to provide a base for topcoats to stick to. Alkyd primers are best for bare wood because they cover bleed-through from wood knots better; be sure the label states that the primer is designed to stop bleed-through. Water-based primers are a good choice if knots aren't an issue. Water-based paints are compatible with both types of primer. When repainting, prime only when necessary. If the paint hasn't cracked or flaked, you may not need to prime at all. Advantage 900 from Porter Paints is designed to go over any existing paint without priming or sanding. If you must scrape down to bare wood, spot-prime. Not sure whether priming is needed? Try this test: Paint a small portion of the wall and let it dry. Then put an adhesive bandage on the newly painted surface and snap it off. If paint sticks to it, the old paint won't support a new coat and requires a coat of primer. If the bandage is clean, power wash the siding and paint. For painting new construction, the FPL recommends dipping each piece of siding in a paintable water repellent, priming, then applying two coats of water-based paint. The lab also suggests installing siding on furring strips, creating a ventilated space behind it to reduce vapor. Seal the bottom with screening to keep insects out. If you hire a painting contractor, be sure he or she follows the paint manufacturer's directions. For example, the temperature should be between 50° and 90°F to apply water-based paint. Also, the topcoat should go on within two weeks of the primer. If you wait too long, the mechanical bond between the two won't be as strong because the surface texture of the primer breaks down. And if two topcoats are used (recommended for new construction), the second should go on within two weeks of the first. There are lots of exterior paints out there. Knowing how to pick the best from a lineup of look-alike cans will help your paint job last well into the next century.
Consider purchasing supplies personally to save money. Ask the painter for a bid that separates labor and materials. Then explain that you'll purchase the materials and ask for a list of exactly what will be needed to complete the job. Caulking, for example, is an extra supply commonly used to fill any cracks or damaged areas in your walls -- and one that might be overlooked in an incomplete list.
Third: The contractor buys the materials. We get them at a better rate and customers really don't know what they are getting into by being a material racer. Once again, I'm not referring to the guys that paint a bedroom or 2 a week. Tell the homeowner to go grab 50 gallons of paint, $300.00 worth of sundries and related job cost items and I'd be interested to see how it works for them....IT WILL NOT. And if were talking about people getting taken advantage of here, the paint suppliers with no relationship to a homeowner will 100% GOUGE the customer and completely take advantage of them with pricing. Contractors will pay nearly half the price and will still save the customers money marking up paint 10-15%.
Even the best exterior paint can fail if it's applied incorrectly. Always use a primer when painting any untreated surface to seal it off and to provide a base for topcoats to stick to. Alkyd primers are best for bare wood because they cover bleed-through from wood knots better; be sure the label states that the primer is designed to stop bleed-through. Water-based primers are a good choice if knots aren't an issue. Water-based paints are compatible with both types of primer. When repainting, prime only when necessary. If the paint hasn't cracked or flaked, you may not need to prime at all. Advantage 900 from Porter Paints is designed to go over any existing paint without priming or sanding. If you must scrape down to bare wood, spot-prime. Not sure whether priming is needed? Try this test: Paint a small portion of the wall and let it dry. Then put an adhesive bandage on the newly painted surface and snap it off. If paint sticks to it, the old paint won't support a new coat and requires a coat of primer. If the bandage is clean, power wash the siding and paint. For painting new construction, the FPL recommends dipping each piece of siding in a paintable water repellent, priming, then applying two coats of water-based paint. The lab also suggests installing siding on furring strips, creating a ventilated space behind it to reduce vapor. Seal the bottom with screening to keep insects out. If you hire a painting contractor, be sure he or she follows the paint manufacturer's directions. For example, the temperature should be between 50° and 90°F to apply water-based paint. Also, the topcoat should go on within two weeks of the primer. If you wait too long, the mechanical bond between the two won't be as strong because the surface texture of the primer breaks down. And if two topcoats are used (recommended for new construction), the second should go on within two weeks of the first. There are lots of exterior paints out there. Knowing how to pick the best from a lineup of look-alike cans will help your paint job last well into the next century.
A fresh paint job has the power to totally transform the look of your house in less time and for less cash than any other remodeling project. That thin skin of resin and pigment also protects your investment, shielding it from sun, wind, and rain—until the paint begins to crack and peel, that is. Then it's time to button up with a couple of new coats. Properly applied, new paint should last for a good 15 years, provided you use top-quality materials, apply them with care (and with an eye on the weather), and, most important, clean and sand every surface first. Here's what you need to know to get a first-class finish on your home's exterior.

cost to paint brick house


O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
A good contractor doesn’t just do quality work, of course. Workers should be courteous, pleasant, and capable of clear communication. Ideally, the people altering your home’s look will be enthusiastic about the task rather than jaded and burnt out. Find out from your references what kind of attitude the company’s workers displayed, and whether they behaved professionally. Also ask whether the crew stayed on schedule, and whether they arrived early each day, did their work, and got out of there.

You can save a bundle by doing the labor yourself. The biggest DIY expense is paint. Other expenses include buying or renting supplies and equipment, like caulk, primer, brushes, rollers, tarps and ladders or scaffolding. Freeman advises applying paint with brushes, not a sprayer. “If you overspray all the window frames and overspray your shingles and your sidewalks and the brick on the front of the house, you do damage that is not easily fixed,” he says.
Are you searching for the best painting contractor that Folsom has to offer? You can find the best painter with the team of experts at PaintRite Pros. We offer interior and exterior painting services, as well as a wide range of home improvement services. When you schedule your appointment, we’ll also arrange for you to meet with one of our highly skilled color specialists that will assist you in selecting an ideal painter for your specific job.

interior house painting near me


Our company headquarters is located in Taylor, MI and consists of a 40,000 square foot warehouse where we inventory thousands of products, our state-of-the-art Learning Center and our corporate offices. We have 37 retail stores throughout Alabama, Illinois, Indiana, Georgia, Michigan, Missouri, Ohio and Pennsylvania to serve our customers with a local touch. With all of our facilities, our staff of over 300 PSE team members and a fleet of over 100 delivery vehicles, we provide expert service, value-added training programs and just-in-time delivery to our valued customers. We are proud to service  more than 6000 end-user customers throughout the United States in the markets we serve.    It’s no wonder why over 6000 customers throughout the United States have chosen Painters Supply to be their trusted partner.  If you are seeking to partner with an Automotive or Specialty Coatings distribution company whose main focus is to improve and grow your business, we hope you consider Painters Supply & Equipment Co.
Our company headquarters is located in Taylor, MI and consists of a 40,000 square foot warehouse where we inventory thousands of products, our state-of-the-art Learning Center and our corporate offices. We have 37 retail stores throughout Alabama, Illinois, Indiana, Georgia, Michigan, Missouri, Ohio and Pennsylvania to serve our customers with a local touch. With all of our facilities, our staff of over 300 PSE team members and a fleet of over 100 delivery vehicles, we provide expert service, value-added training programs and just-in-time delivery to our valued customers. We are proud to service  more than 6000 end-user customers throughout the United States in the markets we serve.    It’s no wonder why over 6000 customers throughout the United States have chosen Painters Supply to be their trusted partner.  If you are seeking to partner with an Automotive or Specialty Coatings distribution company whose main focus is to improve and grow your business, we hope you consider Painters Supply & Equipment Co.
Some previous customers may blame the contractor for problems that resulted from adverse weather conditions — something no one could control. Negative feedback can be important to consider, and repeated horror stories are a sign to stay away, but some complaints must be taken with a grain of salt. This is especially true if you visit online guides like Yelp, where disgruntled customers can anonymously rip a company to shreds, with or without cause.

ferris home improvement


My wife and I just painted the interior of our house with about 6-8 gallons, of $30+ per gallon (meaning the good stuff, non-diluted) with absolutely fantastic results. However we just paid an average of $5 per gallon. Reason...all big box stores have paint, set aside, that has been mixed but not picked up by the customer. They need to sell it quick and if you're not in a hurry (you know well in advance that a room or two need painting and it's not like the roof leaking and needs an immediate fix) you can go to each store when you need other supplies or food, like Walmart (when convenient, driving 20 miles to each is not worth it) and over the course of a month or two, pick out some very nice colors of quality paint. We found perfect colors...not saying they were our first choice but when we opened the can, very nice and some even better than our original picks. Cost to paint the entire house was about $100, with all materials included, period. We had it on the market for a few months to sell, didn't sell, painted the rooms, got 2 offers the day after we finished, took the best one and never looked back.

cost of painting interior of house


The Association seeks to advance, encourage and recognise the highest standards of trade craftsmanship and ethical business practice in residential, strata, industrial commercial and historical projects. We do this by providing members and consumers with up-to-date information on a regular basis and also through our Awards for Excellence which is held annually and where we see the best of the best competing.
Our profession is competitive but the way we go about our business is anything but normal when it comes to servicing our client’s homes. We take pride with every single exterior or interior painting project that we undertake because we understand that we only get one chance to prove ourselves to you and your neighbors concerning your house paint project so we make it count, every time.
We understand that no two projects are exactly the same so we take the time to cover all the options with you before we begin.  From color choices and color theory to which finish is right to which type of coating is right.  And when you choose Your Painters you get advice from the experts - a color consultation  is included with any multi-room or exterior project and will enhance the process and help ensure your satisfaction.  It's our attention to detail that sets us apart.
SF Gate recommends an inside-out approach to choosing paint colors. This involves picking a central item and building a room’s color scheme around it. The article also repeats an age-old bit of painting wisdom: Test your colors on small sections of wall before going all out. There are even tips for homeowners planning to sell: Light colors make rooms look bigger, and white acts as a “blank canvas” that lets potential buyers imagine things their way.

As a former professional painter, something that drives me crazy is when I see painters cut in around wall plates. First of all, the amount of time that it takes to cut in is usually much longer than the amount of time that it takes to simply remove the wall plate. Secondly it does not look nearly as clean as it does when the wall plate is removed and thirdly it can invariably leave paint on the wall plate itself which also looks sloppy. Make sure the painter takes them off and then reinstalls them. It's less time.
Payment. Every client is different. Every job has it's own unique set of circumstances. I always start off the discussion with my clients saying that I'm flexible on how they would like to proceed with payments but that I prefer half down. I refuse to change order. Change orders are my last resort. Instead I ask questions at our initial meeting and try to be sure to cover all bases before I submit my estimate.
Satin - Has a slight sheen as seen in Figure 6. This is our standard paint sheen unless specified otherwise. Satin is more durable and easier to clean than a Flat paint. It may highlight rotted or swollen areas in the siding more than a Flat paint. Scott's Painting & Staining Inc. can repair these areas prior to repainting. The house in Figure 6 is finished with Sherwin Williams SuperPaint in a Satin finish, which gives the house a brilliant sheen!
Jensen Exteriors is Salem’s trusted exterior remodeling service provider. We employ professional roofing contractors that provide exceptional painting, siding, and window replacement. With over 40 years of experience, we are one of the most qualified renovation companies in the Salem area as well as truly committed to providing high-quality results that property owners can depend on. Our competitive pricing makes our exterior solutions perfect for everyone. Explore more about what we can do for you by reaching out to our knowledgeable contractors.
Painters Supply & Equipment Co. has been a leading Automotive and Specialty Coatings Distributor since 1952 and has grown to be one of the nation’s premier suppliers of Automotive, Industrial, Fleet and Architectural coatings and associated products.  Painters Supply continues to provide leading-industry sales, service and support that has led to the elite status of “PPG Platinum Distributor.” PPG, one the world’s leading manufacturers of automotive and commercial coatings, relies extensively on Painters Supply and the Platinum network to provide certified technical training and best-in-class support to the refinish and commercials markets.  Painters Supply has been awarded the PPG’s prestigious Distributor of the Year designation multiple times over the last 25 years, and recognizes the Painters Supply organization as the leading PPG Distributor in North American based on growth, customer service, industry training and support initiatives.
In addition to getting references from your finalists, you’ll want bids. Get them from at least three different contractors, and make sure they’re all based on the same criteria. Find out what each contractor’s estimated timeframe is for the project, and whether there’s a waitlist. A good contractor should offer a warranty. Three years is fine; one year usually isn’t enough. Look at the warranty in writing, and make sure you understand any limitations or exceptions written into it.

exterior house painter libertyville

×