Sorry it is difficult to trust almost anyone in the trades. It is easier to do the work myself and not deal with strangers in and around my house. When I have to hire someone I tell them up front that I'll be checking every detail, pay extra to purchase the materials myself, and if they don't want the job - well good! I always fine someone who will work with me as I pay a bonus for that.
Only a dummy gets involved with so-called "contractors." Hire a qualified actual worker yourself. Check out their resume/background, etc. RULE #1..NO ADVANCE DEPOSITS! Pay daily or weekly or upon satisfied completion according your standard, not workers. Contractors are merely employment agents. If that's the way you get work done, then go ahead and waste your money and wind up with the myriad of problems enumerated upon in the news clip above. RULE#2.. NO SMOKERS. They are lighting up on your money. RULE#3: No cell phones while working. Talk on their own time after work
Any nails that have loosened their way from the house will either be replaced or recessed back into the siding. By recessing loose nails, the siding joints will be tighter which will aid the caulking to completely seal the house. This not only reduces energy bills but keeps the siding from flexing, which can cause caulking to split prematurely. When Scott's Painting & Staining Inc. replaces siding or does any carpentry work, ring shank nails are used which can slide into the wood but the arrow shaped rings keep them from loosening back out over time.
Yes the pricing does change, and quite significantly. I have worked inside the paint industry on counter sales outside sales and application for over 10 years. One thing many people do not understand is, the resins in the paint are more expensive to produce the higher the sheen goes. Therefore the company is at of higher cost making the paint, which in terms they charge more for the paint. I have seen a 15$ variance between flat-semi-gloss it is not uncommon and is not unrealistic to pay more for a higher sheen. Another thing to add is when doing samples on your wall prior to a painter coming is a good idea, however do not do them in huge squares with heavy coats, remember you are just wanting an idea. A lot of times the issue comes up of the paint not covering the sample coats, in fact it is covering quite well, however the paint sample applied is often times much darker than the wall color, creating a contrasting difference from the lighter surrounding wall and the sample placed on the wall. I recommend getting a piece of sheet rock and using it for the samples so you can move around with it etc.
Day-to-day tasks can consume too much time when there is little or no automation. Countless cloud-based productivity tools are available to streamline and automate your tasks. These tools can usually be put into place with little disruption to your current practices. Ultimately, integrating new automation tools will increase productivity and help you make the most […]

At Jensen Exteriors, we help transform houses into homes! We are a family business specializing in siding, painting, window, and roofing repair and replacement throughout the Salem area. Since 1978, we have provided high-quality renovations to countless homeowners. We offer a one-year reinspection warranty and affordable service to get the most out of your remodeling projects. Get in touch with Jensen Exteriors for your free in-home consultation and estimate!
Both options have their pros and cons. Spraying is the faster method that usually only requires one coat coverage, is free of brush marks and can get into hard to reach areas. Spraying does, however, have a longer prep time, the possibility of uneven coverage, and poor adhesion. Brushing has excellent control, good adhesion, uniform coverage and is better for getting into smaller cracks. Brushing takes a lot longer, requires two coats and can leave brush marks. Make sure your contractor has solid and definite reasons for picking one method over the other.

painting design


so what about hardwood chamfer boards? Specially the common post war 60-70mm chamfer boards. The old paint peels, so the painter sanded it back to bare timber, primed it with water based timber primer,and finished with exterior paint. After about 1 month, the paint had bubbled where the sun hits it most. The painter was advised to use an oil based primer, and the same thing happened. Talking with other painters, they said this is a common issue, and it is not a paint issue, it’s more to do with the timber.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.

asian paints home painting price


If you decide to hire help, have several contractors inspect the job and provide proposals. You'll probably find huge price differences for the same job. A Checkbook undercover shopper got quotes from nine Washington-area contractors to repaint the walls, ceiling and trim for a living room, dining room, family room, bathroom and kitchen. Including paint and supplies, prices ranged from $2,650 or less to more than $6,500.


Nicholas Harding is one of Australia’s most celebrated artists. He has been awarded the Archibald prize, the Archibald People’s Choice award, the Kilgour prize and the Dobell drawing prize amongst others. His work crosses portraiture, landscape and still life. Harding’s oil paintings are created with a glorious impasto technique, he uses gouache to capture the… Read more »
Dave, you said it best! Every pro painting contractor truly worth their salt would and should cut and paste exactly what you say here about where customary and legitimate practices and expectations should be in regards to what customers should expect from contractors and how contractors should professionally deal with their customers. By the way, Dave, if you work in the Atlanta area, I would like to hire you! Thank you for your valuable advice!

Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.


The color wheel seems like a natural place for a how-to guide to start. This one reintroduces the concept of complementary colors, which “bring out the best in each other, making both colors look cleaner and brighter.” Understanding primary, secondary, and tertiary colors wasn’t just helpful for 5th grade art class; it can help you choose the right hues for your home.
Remember: You want to get the highest quality paint your budget will allow to ensure its lasting beauty. You'll also need painting supplies like primer, brushes, rollers and painter's tape. A professional will have these items on-hand. According to statistics, paint and other supplies account for about 15 percent of a professional painter's total cost; labor will factor into 85 percent of their charges.
As an owners rep and former estimator for a gc i do expect to pay a reasonable deposit say 10 percent and then weekly progress payments. I am asking the painter to book his time and to do the work on my schedule. Most painting companies are not huge operations they will pay their staff weekly. For most repaints i ask for one tinted primer coat and one finish coat for 100 percent coverage. New work gets one tinted primer and two finish coats for 100 percent coverage. The cost of the paint is not really that different for colors or finish. Brands like european fine paint and C2 are more expensive than Ben Moore and sometimes more difficult to roll based on their consistency. Some home depot brands are as expensive as the Ben Moore and of equal quality others aren't. Red paints are notorious for number of coats required and special priming requirements.
we only use the best interior paint which goes further as far as pricing a repaint we charge 2.00 a square foot floor space for walls ceilings and trim .on new construction using the best paint 3.90 per foot floor space that is with 3 coats on all surfaces but as being a professional for 45 years i recommend use a professional so that your paint will last longer and you wont have to pay to have it done more often i do free consulting in these areas i am more than happy to assist you with your projects 864-506-6666 just always remember good paint last longer and use a washable paint your home is your most valueable investment take care of it
Some contractors work on time and material others on a firm contract. I would never hire the former and am leary of the latter. A contractor may low-ball a bid to get the job planning to make a killing on change orders. If you say good morning to them, they charge you extra for that. If the contract is not very, very specific and extensively fleshed out or if they display their change order schedule prominently on top, show them the door.

how much do paint contractors charge

×