For years, there's been a lively debate about the supremacy of oil-based or water-based paint. Oil-based products, which include alkyd paints, clean up with mineral spirits. Water-based products, which are referred to as latex paints though they are now based on vinyl and acrylics, clean up with water. Although the question still gets asked, water-based paints win hands down for home exteriors. Research done at the U.S. Department of Agriculture Forest Products Laboratory (FPL) in Madison, Wisconsin, shows that water-based paints expand and contract with the siding. They also allow water vapor generated inside the house to pass through the paint film. Oil-based paints, on the other hand, dry to an inflexible coating that blocks moisture. The results can be telltale cracks as siding gives and paint blisters as trapped moisture tries to find a way out. Water-based paints are also gentler on the environment because they are lower in volatile organic compounds. Does that mean oil-based paint should not be used at all? Certainly not. "When asked to recommend a paint," says Al Beitelman, director of the Paint Technology Center for the U.S. Army Corps of Engineers, "I always ask about the previous paint job. If it worked fine, I suggest using what was there before."

house painting designs


The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.
Enforcement of this Act by the Painter-Stainers Company was sought up until the early 19th century, with master painters gathering irregularly to decide the fees that a journeyman could charge, and also instigating an early version of a job centre in 1769, advertising in the London newspapers a "house of call" system to advertise for journeymen and also for journeymen to advertise for work. The guild's power in setting the fee a journeyman could charge was eventually overturned by law in 1827, and the period after this saw the guild's power diminish, along with that of the other guilds; the guilds were superseded by trade unions, with the Operative United Painters' Union forming sometime around 1831.[2]

local painters


Aren't those automatic sprinkler systems great! Not if they are getting your house or siding wet every day. Check that your sprinkler heads (and your neighbor's heads) are not spraying against the house, especially on any hardboard siding. The sprinkler head may not spray the house directly, the mist may drift with a light breeze or wind. This is another good reason to water in the early morning hours when the wind is generally calmer.

A major difference you will notice in the quality of a Scott's Painting & Staining Inc. job is the amount of caulking we use. If your home is constructed with any type of hardboard siding (Hardboard Horizontal Lap siding or Hardboard Vertical siding), it is critical that all seams and punctures are sealed with a premium-grade caulking. Just priming and painting will not do.


To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.

When you choose Five Star Painting residential house painting contractors, you can feel confident that you are hiring the best in the business. Local Five Star painters have been serving clients throughout the United States and Canada since 2004. From taking time to prepare the area to using exactly the right equipment for each job, we make sure the project is done correctly. Our experience shows: We’re good at what we do, and our clients are always happy with the work we leave behind!
© 2019 Condé Nast. All rights reserved. Use of this site constitutes acceptance of our User Agreement (updated 5/25/18) and Privacy Policy and Cookie Statement (updated 5/25/18) and Your California Privacy Rights. Architectural Digest may earn a portion of sales from products that are purchased through our site as part of our Affiliate Partnerships with retailers. The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Condé Nast. Ad Choices
The last big decision is how to apply the paint. Most pros use paint sprayers because they're fast, but in inexperienced hands a high-powered sprayer can leave drips, thin coats, and a mist that may land on many things other than your siding. If you do hire a painter who uses a sprayer, make sure he is meticulous about removing, covering, or masking off everything in the area that might get hit with overspray: gutters, roofs, windows, shrubbery, walkways, cars—you name it.
Small random-orbit or pad sanders make this job go faster. (Wallis first covers these boundaries with Synkoloid patching compound so no edge is visible after sanding.) As shown, you want to make sure that there is a feathered, smooth transition from exposed wood to old paint. For areas that might get close scrutiny, you can follow up with a 100- or 120-grit rubdown to erase any scratches.
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.

interior painting cost


O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away."
A fellow (actually lives in the same neighborhood) by the name of Wayne Hickey (843-655-0366) painted the ceilings and most of the walls of our house in February 2017. He got paint all over my light fixtures, all over my trim around the doors, and had visible lap marks everywhere on the walls. He came back and rectified some of the problems, but not all, as I have noticed as I have had time to look more carefully at the work he and his assistant did. His assistant had no idea (not a clue) how to roll paint on a wall or ceiling. Some places were not covered. He said he would pull nails for pictures and then re-insert the nails exactly where they were. This he did not do as he promised. He painted over the nails. His assistant had no idea how to use a paint roller. I have painted all my life, and would have done this work myself, but I just had a full knee replacement and the other knee is in bad shape. I just could not do the work. Wayne is a pleasant and congenial individual, but he can not cut in a ceiling or wall to my satisfaction - not even close. He should have a putty knife and wet cloth with him all the time to correct any paint that might get applied where it shouldn't. That is something I always did as a painter. I would not recommend Wayne to paint anybody's home.

house painter


Using the right software makes your job much easier and helps you get the best possible results. You can easily find the right paint combinations to please your client and quickly order the paint from a nearby store. A good field service management application, such as mHelpDesk, allows all departments of your business to smoothly coordinate their efforts, eliminating wasted time and producing happy customers.
I am a painting contractor and have been since 2001. Make sure the estimate provides in writing: What is EXCLUDED as well as INCLUDED. It should state the manufacturer and type of paint going to be used. Estimate says ALL LABOR AND MATERIALS. My estimates to my customers say "guaranteed coverage" eliminates the conversations of 1 coat vs 2 coat. I have my customers submit colors 5 days prior to start date. Customers need to inform me if they are going to use pure white, dark reds, oranges, and bright yellows they need to inform me in that 5 day window, so I can adjust my pricing for 3 coats. Although this more uncommon now than years past because a lot of paint manufacturers have primer with paint products. Let the contractor know if your doing accent walls. This takes longer to cut in straight lines and it requires the contractor to purchase more paint. If you add anything on the scope of work have the painter write out the description and cost prior to them doing the work. Have the estimate say how many days it will take to perform the work. Ask how many workers will be doing the job. Make sure to enforce that number of workers their everyday until the job is complete. Do not give final payment until you do a final walk through. Walk the job when its almost complete and point out areas that you want fixed prior to the contractors final walk through. Its best to do while the workers are still in that particular area as they will have tarps down and areas covered and it will be easier for them to take care of. Purchase a roll of blue tape and stick it to areas that you want fixed. This is called a punch list.
The color wheel seems like a natural place for a how-to guide to start. This one reintroduces the concept of complementary colors, which “bring out the best in each other, making both colors look cleaner and brighter.” Understanding primary, secondary, and tertiary colors wasn’t just helpful for 5th grade art class; it can help you choose the right hues for your home.
Second: all the tricks of the trade in regard to "cheating" customers is for hustlers and cheaters and NOT established businesses. At the end of the project the job should come out looking professionally painted as specified in the contract. A selected color that takes multiple coats that was not calculated by the contractor should cost more money. It's not the fault of the painter.
AFTER READING THE SYNOPSIS OF THIS BOOK I WAS UNDER THE IMPRESSION I WAS BUYING A BOOK THAT WOULD BE BENIFICIAL TO THE ENTIRE PROCESS OF CONTRACT PAINTING. HOWEVER, WHILE IT SAYS THERE IS MUCH INFORMATION ON PREP WORK, THERE ISN'T. THIS BOOK IS FOR THE PAINTER WHO WANTS TO KNOW HOW TO ESTIMATE JOBS BETTER. THATS IT. SURE IT GIVES COMMON TIPS ON RESUME AND ADVERTISING, BUT DOES NOT COVER OTHER THINGS. THIS BOOK IS FOR THE PROFESSIONAL THAT ALREADY HAS CLEAR KNOWLEDGE OF HOW HIS/HER CREW CAN WORK, AND WHAT THEIR OUT PUT RATE IS BUT NEEDS TO KNOW MORE THIS BOOK CAN HELP YOU.
Enforcement of this Act by the Painter-Stainers Company was sought up until the early 19th century, with master painters gathering irregularly to decide the fees that a journeyman could charge, and also instigating an early version of a job centre in 1769, advertising in the London newspapers a "house of call" system to advertise for journeymen and also for journeymen to advertise for work. The guild's power in setting the fee a journeyman could charge was eventually overturned by law in 1827, and the period after this saw the guild's power diminish, along with that of the other guilds; the guilds were superseded by trade unions, with the Operative United Painters' Union forming sometime around 1831.[2] 

painting services


You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.

home design


Marketing is the lifeblood of your business. Without marketing there can be no prospects, no appointments and no projects. Marketing is what makes the register ring. In order to be truly successful in the residential painting business, you must be a marketing expert. You can be average at everything else, but if you use marketing, you will make a ton of money.
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
If professional waste removal is required, we offer on-site dumpsters for an additional cost. Please inquire prior to the work beginning. On large projects a dumpster may be included as an optional, additional line-item in the estimate. You may use the dumpster as an opportunity for any "Spring Cleaning" after the siding work is completed, if there is any additional room in the dumpster. Please let us know if you would like the dumpster left in your driveway after all carpentry work is completed.

home painting


Some previous customers may blame the contractor for problems that resulted from adverse weather conditions — something no one could control. Negative feedback can be important to consider, and repeated horror stories are a sign to stay away, but some complaints must be taken with a grain of salt. This is especially true if you visit online guides like Yelp, where disgruntled customers can anonymously rip a company to shreds, with or without cause.

ferris home improvement

×