Keeping water vapor out of a house’s outer walls is easier if there are plastic vapor barriers between the drywall or plaster and the framing. This is less often the case in older homes than in newer ones. If peeling occurs near or in a bathroom, shower-related dampness is likely at fault. One way to reduce the area’s moisture level is to put in an exhaust fan. In general, if part of the house is consistently damp, then the origin of that dampness must be discovered and dealt with.
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Some proposals simply say to paint the walls and ceiling and never specify the number of coats to be applied. If the colors are similar enough, it's possible to get away with one coat of paint and not discount your pricing. No matter how hard you try, tiny, pin-sized air holes will pop exposing the original walls. This may not bother you if you can't notice it, but principally speaking you should have paid your painter less for the work.

painting brick exterior


Making sure you hire a true professional will ensure that you get the most durability and satisfaction out of your paint job. Save yourself time and frustration by asking the right questions to weed out inexperienced and unqualified companies pretending to be professional painters. Before you commit to a company, come prepared with these in-depth questions to find the best company for your painting project.
Primer/Paint: “The whole industry is shifting to combination primer and paint,” says Mauro. “That’s a good thing, since a lot of people skip the primer, and the combination is better than nothing.” Still, for an unfinished or problem surface, he always uses a stand-alone primer. And if he’ll be using a dark paint, he tints the primer with about 80% of the paint color to ensure that two topcoats will do the job.

how much to paint interior of house


SF Gate recommends an inside-out approach to choosing paint colors. This involves picking a central item and building a room’s color scheme around it. The article also repeats an age-old bit of painting wisdom: Test your colors on small sections of wall before going all out. There are even tips for homeowners planning to sell: Light colors make rooms look bigger, and white acts as a “blank canvas” that lets potential buyers imagine things their way.
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.

Good contracts include descriptions of prep work and repairs; paint specs by brand name, type, color and product number; the number of coats; and a full description of the work, including frequently omitted items such as cabinet interiors and shutters. Minimize delays by specifying that, weather permitting, work will be continuous. Get a payment schedule that minimizes the down payment — the more payment you can withhold until the end, the more leverage you'll have to get the job done well and per your specifications. Insist that contractors provide proof that they carry both general liability and workers' compensation coverage.

how much to paint a house


Both options have their pros and cons. Spraying is the faster method that usually only requires one coat coverage, is free of brush marks and can get into hard to reach areas. Spraying does, however, have a longer prep time, the possibility of uneven coverage, and poor adhesion. Brushing has excellent control, good adhesion, uniform coverage and is better for getting into smaller cracks. Brushing takes a lot longer, requires two coats and can leave brush marks. Make sure your contractor has solid and definite reasons for picking one method over the other. 

house color combination


State your expectations. The number of coats a painter applies isn’t the only factor in determining the quality—and price—of the project. Preparation is also key. If you want a surface that’s free of unevenness from past paint jobs, tell the contractors—and be prepared to pay extra. But if you can live with some imperfections, agree on what level of prep is acceptable and what isn’t.

how much does a paint contractor charge

×