Both options have their pros and cons. Spraying is the faster method that usually only requires one coat coverage, is free of brush marks and can get into hard to reach areas. Spraying does, however, have a longer prep time, the possibility of uneven coverage, and poor adhesion. Brushing has excellent control, good adhesion, uniform coverage and is better for getting into smaller cracks. Brushing takes a lot longer, requires two coats and can leave brush marks. Make sure your contractor has solid and definite reasons for picking one method over the other.

house color combination


Any of these primers may be used, depending on the conditions required on your home. Oil-based primers soak into new wood better and are also used on rusting areas, such as around gas meter, prior to painting. Oil-based primer works better in keeping steel gas meters and other steel surfaces from rusting in the future. Notice the amount of white primer in Figure 3, that Scott's Painting & Staining Inc. applies to give a professional looking finish. This photo also shows the efflorescence coming out of the concrete block foundation that was scraped off and treated with a Concrete & Masonry Primer designed to help control efflorescence.
We are completely dedicated to making sure our customers are satisfied with the painting services we provide. We use only our top notch tools and paint so you know you can depend on the work we do for you. We will complete any job you hire us for as efficiently as possible and within any budget you set. As a residential paint contractor, we can paint the interior or exterior of your home or office. We can also provide our pressure cleaning service on any surface on your property to get rid of dirt and make sure it's completely clean and ready for us to paint.

The PaintRite Pros take all the stress out of painting your home. You’ll have the best painting contractor in Folsom doing all the work for you. If you need your home’s exterior painted, we will gladly paint or stain any exterior surface, including wood, vinyl siding, composite siding, stucco, concrete, brick, gutters, shutters, doors, windows, wrought iron, patios, and more. We’ll also repair any damaged wood or stucco. If you are seeking someone to paint your home’s interior, we can cover any inside surface. We also offer cabinet finishing and painting services, in which we’ll transform your old cabinets to a brand new work of art. We can transform old cabinets to new condition and for a fraction of the cost of replacing them.

If a company has a formal training program, it’s a safe bet that they have their act together. They can do training in-house through regular meetings of their employees.  They can have field training systems in place, usually coordinated with classroom training sessions.  They can also use trade associations, such as PDCA (Painting and Decorating Contractors of America) or paint manufacturer’s representatives to stay up to date with the latest materials and techniques. 

home improvement near me


My wife and I just painted the interior of our house with about 6-8 gallons, of $30+ per gallon (meaning the good stuff, non-diluted) with absolutely fantastic results. However we just paid an average of $5 per gallon. Reason...all big box stores have paint, set aside, that has been mixed but not picked up by the customer. They need to sell it quick and if you're not in a hurry (you know well in advance that a room or two need painting and it's not like the roof leaking and needs an immediate fix) you can go to each store when you need other supplies or food, like Walmart (when convenient, driving 20 miles to each is not worth it) and over the course of a month or two, pick out some very nice colors of quality paint. We found perfect colors...not saying they were our first choice but when we opened the can, very nice and some even better than our original picks. Cost to paint the entire house was about $100, with all materials included, period. We had it on the market for a few months to sell, didn't sell, painted the rooms, got 2 offers the day after we finished, took the best one and never looked back.

trending house colors


For interior paint I prefer the semi-gloss, provides a very subtle sheen and is super easy to clean -no flaking, chipping, etc. I've painted a lot, and found that Sherwin Williams Ovation paint has been the easiest to use, and provides the best coverage. I even painted my ceilings with it and WOW! I was done it no time at all, with perfect coverage.
Tru Colors Contracting is an experienced residential paint contractor that has been serving Miami, Broward and Palm Beach Counties for many years. We are completely dedicated to providing our residential customers with high-quality interior and exterior painting services that yield beautiful and long-lasting results. Painting is one of the easiest ways you can enhance the look of your home and that's what we will do for you with our services. We can paint the inside and outside of your home, including any structure or surface that is looking dull or worn and needs a new look.

how much does it cost to paint a house


I totally agree with this as well. I think every time I have read Angie's List reports, they are inaccurate and not researched enough. I had COMPLETE faith in Angie but lately I am hesitate on reports. I would check your local hardware store or even your neighbors to get a recommendation for painters. If you liked what you saw, you can be stress free with your results. I live in Texas and I have borrowed my hardware store opinion bc that seems to be the place most of the contractors or painters come to buy stuff for the jobs. If your neighbors painters, contractors, electricians and plumbers have shown good results, stress free you. I have been stress free with results, glad I asked for other opinions.Don't forget, the Hardware Store knows if that person is trustworthy and honest, their accounts would be shut down.

Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.

Painters Supply & Equipment Co. has been a leading Automotive and Specialty Coatings Distributor since 1952 and has grown to be one of the nation’s premier suppliers of Automotive, Industrial, Fleet and Architectural coatings and associated products.  Painters Supply continues to provide leading-industry sales, service and support that has led to the elite status of “PPG Platinum Distributor.” PPG, one the world’s leading manufacturers of automotive and commercial coatings, relies extensively on Painters Supply and the Platinum network to provide certified technical training and best-in-class support to the refinish and commercials markets.  Painters Supply has been awarded the PPG’s prestigious Distributor of the Year designation multiple times over the last 25 years, and recognizes the Painters Supply organization as the leading PPG Distributor in North American based on growth, customer service, industry training and support initiatives.
All-acrylic binder. The binder is what holds the pigments, mildewcides and other solids that form the actual paint film. Look for latex paint with an all-acrylic binder, which is inherently more weather resistant than vinyl or vinyl-acrylic. Many paint companies use a modified acrylic for their interior lines and all-acrylic for premium exterior paints made to endure the elements. For example, Glidden's Spred Satin is an interior with a modified acrylic, while its Spred Dura Satin is an exterior paint with an all acrylic binder. If you don't see "100% Acrylic" or "All Acrylic" in bold on the front of the can, check ingredients for "acrylic polymer." Also be sure you pick the right paint for the surface you're covering. Most water-based exterior paints can be used on wood and hardboard siding and trim. They're also fine for vinyl and aluminum siding, and most masonry. On stucco prone to cracking, use an elastomeric paint. It's more flexible than standard coatings and leaves a durable film that's twice as thick (about 5 mil). An example is the stucco paint from Valspar, which bridges hairline cracks to keep out water. You can also buy paint tailored to conditions in specific regions of the country. Dutch Boy's ClimateGuard line was the first of these paints from a major manufacturer. For example, its Southeast formulation has extra mildewcides for a humid climate, while Northwest paint is higher in solids to resist months of rainfall.
Estimates are one of the most important tools to help you land the next job. During our most recent webinar series on estimating, Fred Yarur of PEP (Painter’s Estimating Program) outlined 10 foundational principles to support effective estimating procedures. Use estimate tools. These enhance your ability to make informed decisions. Estimating is the process of […]
Both options have their pros and cons. Spraying is the faster method that usually only requires one coat coverage, is free of brush marks and can get into hard to reach areas. Spraying does, however, have a longer prep time, the possibility of uneven coverage, and poor adhesion. Brushing has excellent control, good adhesion, uniform coverage and is better for getting into smaller cracks. Brushing takes a lot longer, requires two coats and can leave brush marks. Make sure your contractor has solid and definite reasons for picking one method over the other.

painting design


The Painter Guide was created by Eric Barstow of PaintingBusinessPro.com and Chandler Zieg of PaintingLeads.com. We come from a vast background in house painting. Our national painting company produces over $4 million in revenue each year and our education and advertising service for painters sells over $1.5 million per year. We’ve literally helped thousands of painters grow their businesses.
My painter franchisee, who I got from Angie's List, must have found some shmucks on the corner to paint my house. I specifically said I wanted stain. First my house was painted the wrong color, Then it was painted with LATEX paint- not stain. Estimates to 'undo' the damage is around $10,000 and its not a guarantee that it will work. The work is at best amateurish. Many underpainted or not painted spots, drips, etc. They did the entire outside (scraping?, priming? caulking?, painting), cleaned up and left within the time I left for work and came home. There were thee of them (my neighbor told me) This was two years ago and I am still upset. Can't be fixed.

To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.

asian paints home painting price

×