Prep. For new work the painter accepts the finish done by the drywall or plaster and once he accepts the work and starts painting he owns any wall repairs. Existing work is a different thing. I take a high intensity light and circle the kinds of defects with chalk so we are all in agreement before they start. Sometimes this results in a higher price and we have to compromise on how much to do...

exterior house painters near me


Scott's Painting & Staining Inc. primarily uses Sherwin Williams SuperPaint in a Satin finish, which carries a 25-year manufacturer warranty. Satin paint offers better water repellency characteristics than a Flat paint, is more durable, and allows for easier cleaning. Additionally, it will give you a beautiful sheen to really make your house pop! You can easily wash down the side of the house with a garden hose to remove dust buildup over the years. Exterior finishes available from Sherwin Williams are:
The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.

house colors 2016


While preparing your home for painting, we will be carefully working on and inspecting every inch of your home. Sometimes additional rotted wood is found after removing peeling paint or siding. If any additional damage is found, we will communicate what we find, along with solutions and pricing options. An example of items that may be found while working on your home could be rotten or soft siding or windows, wood-pecker damage, sub-structure damage, etc. We prefer to let the customer know of any issues rather than just painting over them or covering them up. Please see our rotted siding/window replacement page for more information about identifying any problem areas.

house colors 2018


Along the perimeter of a wall, where it meets the trim, the ceiling, and other walls, brush on a 1½- to 2-inch-wide stripe of the wall color. Painting that stripe, a process called cutting-in, puts paint in areas that a roller can’t easily reach. Next to trim and the ceiling, cutting-in also forms a crisp paint line that would be impossible with a roller alone. To get the best results, use long, steady strokes and a brush that isn’t overloaded with paint. Henrique prefers to cut-in with a 2½-inch-wide angled sash brush. For maximum control, he grips it at the ferrule, with his fingers as close to the bristles as possible.
To hide the texture of the brushstrokes made during cutting-in, run a lightly loaded  roller as close as possible to corners or the edges of the trim. At the top of the wall, you’ll have to climb a stepladder to do this. When this first coat is dry, in about 90 minutes, repeat the wall-painting sequence, including  the cutting-in, and cover the entire wall with a second and, if necessary, a third coat.

house painters


Oh, where to begin? Let me start with 'watered down paint'. 25-50% before the material gets to the site? Impossible. You would basically be painting with water at that point. It would be less of a hassle, and cost, to simply use proper material. You would be forced to apply three coats instead of two, as the coverage would be horrible. Whatever cost you think might be saved in materials would be lost in labor.

interior painting services


This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.

The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture.


Professional residential and commercial painting services in Elk Grove and house painting in Sacramento. Family owned and operated for over 25 years, we are dedicated to not only conducting ourselves in a professional manner but humbly recognize that we are working on our customers’ most prized material possession. From picking out your colors to the final walk through, we are there for you from start to finish. We are PaintRite Pros.

house outer painting exterior painting


Satin - Has a slight sheen as seen in Figure 6. This is our standard paint sheen unless specified otherwise. Satin is more durable and easier to clean than a Flat paint. It may highlight rotted or swollen areas in the siding more than a Flat paint. Scott's Painting & Staining Inc. can repair these areas prior to repainting. The house in Figure 6 is finished with Sherwin Williams SuperPaint in a Satin finish, which gives the house a brilliant sheen!

how much do home painters cost

×