The PREP Study is attempting to reduce isocyanate, dust and solvent exposures for autobody shop workers in Connecticut. We have produced a user-friendly DVD-based training program with a great deal of input from the autobody community. The DVD contains information for painters, autobody technicians and anyone else working around a body shop, including:
Your painting contractor should be able to tell you which premium products they use, and why. High-end materials and products perform better, look nicer, and last longer - if your contractor uses low-end options to drive your cost down, they’re not doing you any favors.  When reviewing your proposal make sure a specific product is listed, not just a paint manufacturer.  Every manufacturer has contractor grade options.  
The PPG logo is a registered trademark and Colorful Communities and We protect and beautify the world are trademarks of PPG Industries Ohio, Inc. © 2019 PPG Industries, Inc. All Rights Reserved. | Legal Notices & Privacy Policies | CA Transparency in Supply Chain Disclosure | Global Code of Ethics | TISC for PPG Architectural Coatings UK Limited | TISC for PPG Industries (UK) Limited | PPG Industries UK Ltd 2017 Gender Pay Gap Report
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.

All-acrylic binder. The binder is what holds the pigments, mildewcides and other solids that form the actual paint film. Look for latex paint with an all-acrylic binder, which is inherently more weather resistant than vinyl or vinyl-acrylic. Many paint companies use a modified acrylic for their interior lines and all-acrylic for premium exterior paints made to endure the elements. For example, Glidden's Spred Satin is an interior with a modified acrylic, while its Spred Dura Satin is an exterior paint with an all acrylic binder. If you don't see "100% Acrylic" or "All Acrylic" in bold on the front of the can, check ingredients for "acrylic polymer." Also be sure you pick the right paint for the surface you're covering. Most water-based exterior paints can be used on wood and hardboard siding and trim. They're also fine for vinyl and aluminum siding, and most masonry. On stucco prone to cracking, use an elastomeric paint. It's more flexible than standard coatings and leaves a durable film that's twice as thick (about 5 mil). An example is the stucco paint from Valspar, which bridges hairline cracks to keep out water. You can also buy paint tailored to conditions in specific regions of the country. Dutch Boy's ClimateGuard line was the first of these paints from a major manufacturer. For example, its Southeast formulation has extra mildewcides for a humid climate, while Northwest paint is higher in solids to resist months of rainfall.


Aren't those automatic sprinkler systems great! Not if they are getting your house or siding wet every day. Check that your sprinkler heads (and your neighbor's heads) are not spraying against the house, especially on any hardboard siding. The sprinkler head may not spray the house directly, the mist may drift with a light breeze or wind. This is another good reason to water in the early morning hours when the wind is generally calmer.

Turn your paintbrush into big profits. Whether you own a paint contracting business or you're ready to start one up, Paint Contractor's Complete Handbook, by Dennis D. Gleason, will help make the difference between flat growth and a glossy profit picture. From bidding on jobs to estimating wallcovering, this business-building advisor helps you make profitable decision on costs, materials, equipment and prep work for any type of job - repaint work, new construction, commercial and industrial projects, even government contracts. You'll see how to prepare winning bids...promote and market your services...estimate labor, equipment, overhead and profit...prevent legal disputes...read blueprints...select the right materials...and much, much more.

can i deduct home improvements


Is there damage to your ceiling?  Do you need to repair and re-texture a section to blend with your old ceiling?  We can help in making new repaired ceilings blend with your old texture or we can create a new texture for your entire ceiling.  Many painting companies stay away from this kind of repair as it is not easy to do and takes years of experimenting to learn the art of blending textured ceilings. We can also repaint your entire ceiling with a professional spray finish- making them look new again. Cigarette smoke damage and yellowing of ceilings is a common problem we come across. It’s important to know that there are strategic steps to follow to completely get rid of that yellow tinge in your ceilings. That is why you can feel confident choosing Weiler Painting.

exterior wall painting


I managed commercial construction projects for many years, have built and remodeled several properties, and never once have I encountered any of these scams. The tone of this article is deeply troubling. The author seems to be saying that ALL painting contractors are inherently dishonest, and that has not been my experience. The underlying advice here is sound: get it all in writing and cover as many contingencies as possible--so pointing out potential pitfalls like coat coverage is helpful. But do that in the spirit of clear communication of expectations, not with the expectation that the person you are hiring will try to cheat you at every turn. Not every contractor takes outrageous advantage of change orders; not every contractor will sneak past necessary preparation and/or repairs. Contractors of all sorts get a bad rap as it is; reinforcing a stereotype with articles written from this point of view just seems unproductive.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.

asian paints home painting price


For years, there's been a lively debate about the supremacy of oil-based or water-based paint. Oil-based products, which include alkyd paints, clean up with mineral spirits. Water-based products, which are referred to as latex paints though they are now based on vinyl and acrylics, clean up with water. Although the question still gets asked, water-based paints win hands down for home exteriors. Research done at the U.S. Department of Agriculture Forest Products Laboratory (FPL) in Madison, Wisconsin, shows that water-based paints expand and contract with the siding. They also allow water vapor generated inside the house to pass through the paint film. Oil-based paints, on the other hand, dry to an inflexible coating that blocks moisture. The results can be telltale cracks as siding gives and paint blisters as trapped moisture tries to find a way out. Water-based paints are also gentler on the environment because they are lower in volatile organic compounds. Does that mean oil-based paint should not be used at all? Certainly not. "When asked to recommend a paint," says Al Beitelman, director of the Paint Technology Center for the U.S. Army Corps of Engineers, "I always ask about the previous paint job. If it worked fine, I suggest using what was there before."
Your painting contractor should be able to tell you which premium products they use, and why. High-end materials and products perform better, look nicer, and last longer - if your contractor uses low-end options to drive your cost down, they’re not doing you any favors.  When reviewing your proposal make sure a specific product is listed, not just a paint manufacturer.  Every manufacturer has contractor grade options.  
Apply painter’s tape to the floor alongside the baseboard, then tape sheets of rosin paper to this strip. Cover the paper with drop cloths. To ensure good paint adhesion, lightly scuff-sand the trim and windows with 220-grit paper. Remove the dust with a HEPA vacuum, then a damp rag. Do not sand paint that’s more than 40 years old without first testing it for lead.
All-acrylic binder. The binder is what holds the pigments, mildewcides and other solids that form the actual paint film. Look for latex paint with an all-acrylic binder, which is inherently more weather resistant than vinyl or vinyl-acrylic. Many paint companies use a modified acrylic for their interior lines and all-acrylic for premium exterior paints made to endure the elements. For example, Glidden's Spred Satin is an interior with a modified acrylic, while its Spred Dura Satin is an exterior paint with an all acrylic binder. If you don't see "100% Acrylic" or "All Acrylic" in bold on the front of the can, check ingredients for "acrylic polymer." Also be sure you pick the right paint for the surface you're covering. Most water-based exterior paints can be used on wood and hardboard siding and trim. They're also fine for vinyl and aluminum siding, and most masonry. On stucco prone to cracking, use an elastomeric paint. It's more flexible than standard coatings and leaves a durable film that's twice as thick (about 5 mil). An example is the stucco paint from Valspar, which bridges hairline cracks to keep out water. You can also buy paint tailored to conditions in specific regions of the country. Dutch Boy's ClimateGuard line was the first of these paints from a major manufacturer. For example, its Southeast formulation has extra mildewcides for a humid climate, while Northwest paint is higher in solids to resist months of rainfall.
After the paint has dried for at least 5 to 6 hours—or, ideally, overnight—use a utility knife to score around the edges of each pane, then pull off the rubbery masking membrane, as shown. Next, shut the windows, and reattach the window hardware, light fixtures, and electrical covers. Now remove the painter’s tape, rosin paper, and drop cloths. Latex paints don’t fully cure for one to two weeks, so clean the room slowly to avoid raising dust, and don’t rub or scrub the finish during that time.
If you are going to hire a contractor (professional painter) give a room by room punch list of the fixing of holes small or big, have it identified for the painter to tell you if you need a drywall finisher or if he does this type of work good. Wall repairs can be 3-5 steps to do repairs ( one per day for good drying of patching material and a good sanding) this is what gives you a good paint job only using high quality paint.

exterior house painter


Enforcement of this Act by the Painter-Stainers Company was sought up until the early 19th century, with master painters gathering irregularly to decide the fees that a journeyman could charge, and also instigating an early version of a job centre in 1769, advertising in the London newspapers a "house of call" system to advertise for journeymen and also for journeymen to advertise for work. The guild's power in setting the fee a journeyman could charge was eventually overturned by law in 1827, and the period after this saw the guild's power diminish, along with that of the other guilds; the guilds were superseded by trade unions, with the Operative United Painters' Union forming sometime around 1831.[2]

local painters


Estimates are one of the most important tools to help you land the next job. During our most recent webinar series on estimating, Fred Yarur of PEP (Painter’s Estimating Program) outlined 10 foundational principles to support effective estimating procedures. Use estimate tools. These enhance your ability to make informed decisions. Estimating is the process of […]

Watering down the paint 50%? It will not cover. I am a contract painter and found that most people that I make a contract with immediately try to change the deal and get more than they are paying for. Sometimes, I let them cheat me as they may have other work that I wish to do but other times I put my foot down. I try to get the client to look at what I have done each and everyday if I am going from room to room. I cannot do this If I spray the entire project at once. Even when I have them inspect my work, they often just do not tell the truth and wish to scam me the contractor for more and more while paying the same as the original contract. Most people have not a clue how much work is involved in painting a house and just assume that the painter rolls out the work with no prep, sealing off the place to protect things that are not painted. All of my contracts state that if anything is in the way like babies, dogs, cars, plants and furniture that I cannot proceed and that it is their responsibility to move this stuff. I always seem to be turned into a furniture mover and never get paid to wrench my back. Fact is most people try to rob the contractor and this article tries to make it seem that the contractor is robbing the homeowners. My sister is a prime example of this as she always goes for the lowest bid yet expects a world class job. This means if you pay $500 for a two day paint job do not expect the contractor to live at your home for two weeks and make only $500.
This is an area that interior painters can easily cut short to save time. Most contracts don't state the extent of the wall repairs included, so it's up to the painter's discretion how much they will do. If it seems like too much work, they'll usually point out the repairs but don't include it in the bid. They'll then ask you if you'd like it fixed after they start your project and let you know how much more it will cost.

Third: The contractor buys the materials. We get them at a better rate and customers really don't know what they are getting into by being a material racer. Once again, I'm not referring to the guys that paint a bedroom or 2 a week. Tell the homeowner to go grab 50 gallons of paint, $300.00 worth of sundries and related job cost items and I'd be interested to see how it works for them....IT WILL NOT. And if were talking about people getting taken advantage of here, the paint suppliers with no relationship to a homeowner will 100% GOUGE the customer and completely take advantage of them with pricing. Contractors will pay nearly half the price and will still save the customers money marking up paint 10-15%.
If you want a quick caulking job, then Scott's Painting & Staining Inc. is not the contractor for you. We can also offer a highly flexible polyurethane sealant such as OSI Quad sealant, during new carpentry or siding installations. Notice how the 4x8 Hardboard siding is caulked around all edges, in Figure 4, with the exception of the bottom edge to prevent moisture from becoming trapped behind the panel.
***Payment Policy:  Weiler Painting will receive payment of Cash, Check, or e-Transfer for services rendered.  A deposit is usually required for most jobs to cover the material costs of the project.  For projects in excess of two weeks a interim payment will be required and can be discussed prior to commencement of work.  Payment is to be made in full at completion of work stated in contract. 

home depot app for painting

×